Pickling Paste

   A UNIQUE PRODUCT FOR FUMELESS PICKLING AND PASSIVATION ON
   STAINLESS STEEL

The chemical K-2 is available in 3 forms as follows giving the same results. Application of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order to avoid further corrosion and contamination

A)  K-2 PASTE FORM

It is used to clean weld seams and the areas surrounding the welds.

  HOW TO APPLY K - 2 PASTE

1	S1-56 - Degreaser (Removal of oil 50gm/lit.) Apply liquid
	S1-56 - Degreaser on to the surface for 5- 10 minutes. Then
	wash the surface thoroughly with water.
2	K-2 paste is to be applied on the weld seam and
	surrounding area with a brush.
3	Leave the K-2 paste on the weld seam for 15-45 minutes
	depending on the thickness of the oxide scale.
4	Scrub the surface with a plastic bristled brush and then wash surface thoroughly with water.
5	Apply K-2 passivation on the surface and leave it for 10 – 15 minutes.
6	Wash the surface thoroughly with water.

K-2-SI-56 | K-2 Pickling Paste | K-2 Pickling Spray | K-2 Pickling Dip | K-2 Pickling Duplo | K-2 Passivation |
 | K-2 SSA | K-2 400 Series |  K-2 Shine |